The dissolution time of PAM products is not only related to its molecular weight, degree of hydrolysis and quality, but also closely related to the surrounding environment and operation methods.

In general, the higher the molecular weight of the PAM product, the slower it dissolves. The longer it takes, the longer the PAM particles absorb moisture, swell, and then gradually diffuse and disperse. The initial solution is very uneven, and it takes a while to reach the same concentration. This process requires good equipment and proper operation, and it is possible to complete the process in a short period of time. However, some customers will worry that the time for dissolving PAM will not affect the treatment effect. In fact, this can be ignored, mainly because how to make their water treatment equipment, if there is still a section of the feed port from the treatment pool. It can also save part of the time, and the sedimentation tank needs to be precipitated for about half an hour before proceeding to the next step, which can save a part of the time in the feeding port, and then the water ratio is greater than the material ratio, then the dissolution time can be shortened, of course. The scientific operation is the best.

The dissolution time of PAM products is not only related to its molecular weight, degree of hydrolysis and quality, but also closely related to the surrounding environment and operation methods.

In general, the higher the molecular weight of the PAM product, the slower it dissolves. The longer it takes, the longer the PAM particles absorb moisture, swell, and then gradually diffuse and disperse. The initial solution is very uneven, and it takes a while to reach the same concentration. This process requires good equipment and proper operation, and it is possible to complete the process in a short period of time. However, some customers will worry that the time for dissolving PAM will not affect the treatment effect. In fact, this can be ignored, mainly because how to make their water treatment equipment, if there is still a section of the feed port from the treatment pool. It can also save part of the time, and the sedimentation tank needs to be precipitated for about half an hour before proceeding to the next step, which can save a part of the time in the feeding port, and then the water ratio is greater than the material ratio, then the dissolution time can be shortened, of course. The scientific operation is the best.